The Sokkia CX Total Station: Inspired by tradition, ready for the future.

Sokkia’s new CX incorporates several all-new technologies yet maintains Sokkia’s easy-to-use functionality. New features include RED-tech Technology Reflectorless EDM assuring fast 0.9s distance measurement regardless of object, pinpoint reflectorless distance measurement from 30cm to 500m, Coaxial EDM beam and laser pointer for fast and accurate aiming, and accurate measurements even on reflective surfaces. LongLink Bluetooth® wireless data communication provides reliable data instantly to your Bluetooth-equipped controller, up to 500m from the instrument, eliminating the frustration of hand signals and errors on layout, staking and other jobs. TSshield provides new opportunities to secure and maintain your instrument, click here for more information. All this plus IP66 dustproof/waterproof rating, heavy-duty metal chassis and handle, and 36 hours of battery life make the all new CX the industry standard in classic Total Stations! Download Brochure Here

*¹ Operating time may vary depending on environmental conditions and type of work being performed.

Specifications

* special arctic version

** special high temperature model

Topcon ES Series Total Stations – New Advanced Design with Superior Technology

The new ES Series was designed from the ground up to deliver the very latest technology advantages, all in a small, sleek design – you’ll appreciate the advantages from the very first measurement.

Featuring a class leading EDM unit, the ES is able to measure up to 4,000m to standard prisms, and can measure in reflectorless mode up to 500m at an incredible 3mm + 2ppm accuracy.

Measurements are carried out faster than ever, and at 15mm (over 30m), the bright red laser dot pinpoints features with ease. Download brochure here.

	Ultra-Powerful, Advanced EDM 500m non-prism range 4000m prism range Less than 1 second fine measurement
	The exclusive LongLink™ communications functionality in every ES Series model provides operational capabilities never before offered in a manual total station. With a 300m range wireless communication using Bluetooth Class 1 technology, you can now operate the data collector from the “smart-spot” of the crew, the prism pole. Also referred to the two-man, economical robot solution, Topcon’s new LongLink™ technology brings a whole new level of flexibility to your manual field crew.
	Advanced Angle Encoder System “Best in Class” 1” angle accuracy available Incorporates exclusive IACS (Intelligent Automatic Calibration System) on 1” & 2” models
	Ultimate in Rechargeable Operation – 36 Hours! Up to 36 hours of operation on a single charge.*1 Eliminates the need for nightly recharging and carrying extra batteries. Work with confidence all day without the worry of dead batteries.
	Rugged, Waterproof Design Waterproof/Dustproof IP66 design handles the toughest environments Magnesium-alloy housing providing stable angle accuracy Completely
	Easy Access USB 2.0 Memory Up to 8MB storage Environmentally protected Compatible with industry standard accessories and cables

*¹ Operating time may vary depending on environmental conditions and type of work being performed.

The Focus^3D is a high-speed 3D laser scanner for detailed measurement and documentation. The Focus^3D uses laser technology to produce incredibly detailed three-dimensional images of complex environments and geometries in only a few minutes.

• Efficient: The long range of up to 120m, the level sensor, the compactness and ease of use and the auto-registration at no extra cost result in up to 50% savings of scan and processing time compared to conventional laser scanners.
• Precise and Fast: The Focus^3D creates a precise, virtual copy of reality in millimeter-accuracy at a blazing speed of up to 976,000 measurement points per second.
• Economical: The price of the Focus^3D is a revolution by itself. A 3D laser scanner has never been so affordable.
• Revolutionary Simple: Due to its intuitive control concept with touchscreen display, the Focus^3D is as easy to operate as a digital camera.

Don’t give up the luxury of a small compact receiver with instantaneous positioning in order to increase your accuracy and functionality in the field. With an integrated cellular modem and Wireless LAN, Topcon’s GRS-1 is the perfect solution for GIS users with high accuracy requirements who need real-time detail in the field but not a lot of headaches. Download Brochure Here.

GRS-1 Features:

• Submeter, Subfoot or “GIS-RTK” <5cm Accuracy
• Internal GSM or CDMA Modem
• Windows Mobile 6.1 Operating System
• Integrated 2.0 Megapixel Camera
• 256MB SDRAM, 1GB Flash Memory
• Built-in Bluetooth and Wireless LAN Technology
• GNSS (GPS + Glonass) Satellite Receiver

Mobile GIS Mapping System Built for Any Accuracy Requirement

A 72 channel dual frequency L1/L2 GPS receiver with an integrated cellular modem, the GRS-1 is an all-encompassing solution that grows and adapts with your project requirements. It can be used to dial up to a local reference station network for real-time corrections. No extra cell phone hardware is required. Use an external L1 antenna for real-time subfoot work. An external L1/L2 antenna is available for “GIS-RTK” (<5cm) work. Having a variety of accuracy capabilities available depending on the configuration of the unit makes the GRS-1 perfect for any GIS application including high accuracy projects such as utility infrastructure, underground electric and gas, water/wastewater, asset management, and land records management. There is no need to buy multiple products for multiple accuracies. The ability to dial up to a server while in the field allows users to upload and download GIS data directly to and from the database saving time and allowing for more immediate, detailed information.

The GRS-1 integrates an internal 2 megapixel autofocus digital camera to snap descriptive digital photographs. These photographs are automatically linked to GIS features so that no photo file manipulation is needed after the field work is complete. With 256MB of SDRAM and an 806MHz processor, the GRS-1 provides the fastest handheld performance on the market. It is loaded with memory (1GB Flash), but if needed, users can easily increase the memory for photo storage, maps or field data files by sliding an SD Memory card into the slot on the bottom of the GRS-1. With the GRS-1 the amount of detailed, accurate information that can be collected and stored is incredible. When combined with the lightweight small size of the system, the result is unprecedented.

Geoclean creates 360° image sets and 3D colorized LiDAR point clouds that are geospatially referenced to the vehicle trajectory.

Geoclean processing software is provided with the IP-S2 system to convert the output files generated during data collection into data that can be viewed and utilized in other software applications. Post-processing of GNSS data can be performed by obtaining observation log files from a GNSS receiver set up near the site or from a GNSS reference station site. Point clouds from the laser scanners can be viewed and exported from Geoclean for use with GIS and CAD software programs.

With ScanMaster’s operator-friendly interface you become more proficient and productive. Manipulate data with ease and quickly deliver a product to your customer.

• Operator-friendly User Interface
• Mass 3D Point Cloud Acquisition and Manipulation
• Traverse and Back Sight Capabilities
• Image Capture and Live Video Feed
• Target Scans and Tie-Point Registration
• Create Mesh Objects and Annotations
• Click Here to Download Brochure

Feature details:

	Mass 3D Point Cloud Acquisition and Manipulation ScanMaster has been optimized to quickly acquire and manipulate 3D point cloud data. Stream live video to setup the desired scan area and obtain the 3D point cloud data you need.
	Traverse and Back Sight Capabilities With the ability to quickly traverse and back sight, ScanMaster streamlines the process of aligning data captured from multiple occupations into a single coordinate system.
	Image Capture and Live Video Feed ScanMaster uses images to streamline data acquisition. Images can also be used to apply RGB data and texture map scanned data. In addition, ScanMaster can stream a live video feed from the GLS-1000 Scanner via WLAN to a remote PC.
	Target Scans and Tie-point Registration With the ability to precisely locate centers of retro reflective targets, ScanMaster offers a flexible and highly accurate alternative to traditional orientation techniques.
	Create Mesh Objects and Annotations ScanMaster can quickly create mesh objects. These mesh objects are triangulated surfaces that pass through a section of data points, that can be used to create cross-sections and profiles. ScanMaster can also quickly annotate desired information such as angles, and distances.

 

360 degree images are recorded and overlapped to and accurate grid of horizontal and vertical angles. Scanned points and polylines can be overlaid on these images. Use the Images to help identify critical breaklines of the point cloud.

An example of contour lines drawn to a point cloud collected in Las Vegas.

Annotation and measurement tools come standard in ScanMaster. Use these tools to measure object like windows and columns.

Overlay point clouds by intensity color to determine where additional scan locations will be needed.

View you point cloud in the 360 degree angle view with and without images turned on.

Pull multiple point clouds together for life-like representations. Notice the long range scanning ability of he point clouds collected on building in the far background!

Common street intersections come alive with detail from this high density method of scanning. Buildings, utility lines, vegitation and street signs can all be located through laser scanning.

A unique and powerful tool for viewing, analyzing, and extracting features from processed IP-S2 and IP-S2HD datasets.

Features Include:

• Easy-to-use Interface
• Supports Import/Export of ESRI Shapefiles
• Supports Import/Export of CSV and LAS Formats
• Multiple Coordinate System Support
• Click Here to Download Brochure

Spatial Factory software provides a simple interface for combining, viewing and working with your various sensor data from the IP-S2 3D Mobile Mapping System.

Simple Interface – Provides an easy process for loading trajectory, point cloud and panoramic images for collected IP-S2 data.

Multiple Views – Collected IP-S2 data can be viewed in a variety of ways either by viewing the data on a background map, in 3D, or in the Panoramic view.

Panoramic View – The Panoramic view allows the user to see the colorful images overlaid with collected point cloud data to perform extraction of desired features. The user can easily adjust Point Reduction, Transparency and Point Size using slider bars for a customized view.

Take Measurements – Just click the Measure Tool on the tool bar to measure the distance between 2 points in the view. Get Slope Distance and various Point Details.

GIS Feature Extraction – Point, line and area features and attributes can be mapped and edited directly from the viewing screen and exported in shapefile (.shp) format or as an ascii (.csv) file. Spatial Factory also supports the import and export of shapefiles including full attribution from existing geodatabases.

Fully Integrated High Density 3D Laser Scanning and Digital Imagery Mobile Mapping System

Welcome to GeoShack Machine Control Support

Welcome to GeoShack Support your 24/7 information resource. As a member of GeoShack Support, you can find updates to firmware and software, find answers by using the search option, engage in a forum based discussion and find those helpful tips and tricks. Use the navigation on the left side of the screen to easily navigate and find the information you require. If you have any questions please call us at (800) 444-5661.

Manuals | Software | Quick Guides | How To | FAQ